This 55 footer has set a standard in 'off the shelf' cray boats. Boat No.2 sister vessel to "Drifter" has again achieved great success with the Power family of Port Lincoln South Australia. The boat incorporates the Gavin Mair proven deep forefoot and rounded section shapes for superb sea handling in ALL DIRECTIONS, and very good load carrying capabilities. Must see the video (click at right to view).
Vessel
Specifications
Metric
Imperial
Overall Length
16.76 m
55'
Waterline Length
15.21 m
49' 11"
Beam
5.25 m
17' 3"
Draft @ Working Displ.
1.65 m
5' 5"
Working Displacement
22 T
48,510 lb
Light Displacement
14.8 T
32,634 lb
Deck height above Waterline
0.900m
2' 11"
Bow Freeboard at rest
2.175m
7' 2"
Fuel Capacity
2 x 2100 Litre
1,110 US gal
Engine/s
V8 Fiat Iveco aifo
Total Installed Power
515 kW
700 bhp
Sprint Speed
41 km/h
22 knots
Cruise Speed
31.5 km/h
17 knots
Structure
Metric
Imperial
Bottom Plates
6mm
1/4"
Side Plates
5mm
3/16"
Main Deck Plates
5mm
3/16"
Foredeck Plates
4mm
5/32"
Superstructure Plating
4mm
5/32"
Nominal Frame Spacing
650mm
2'2"
Additional Information
Dry ride, low impact re-entry and also very good directional stability in following seas. High strength construcion with full Department of Transport survey approval.Propeller - 4 Bladed Gearbox - ZF IRM350A Ratio-2.636:1
Vessel Application
Rock Lobster, Oyster and Mussel farm boat. Good hull and capability for dive charter and any application requiring deep sea safety and handling.
Aluminium Delivery Pack Dimensions
Metric
Imperial
Length
9.1 m
30'
Breadth
2.3 m
7'6"
Depth
0.6 m
2'
Delivery Pack Weight
11.8 T
26,015 lbs
These
specifications take precedence over the blueprints that are available
for downloading. The manufacturer
reserves the right to alter specifications without notice, some photos
may show optional extras.
;)
;)
